Securing the backplane to the wall bracket
A mounting screw is used to securely locate the backplane on the wall bracket. This provides
additional rigidity to ensure the backplane and CCU connectors do not move.
Remove the fourth and fifth cover from the backplane.
Locate the backplane on the bracket and connect it to the CCU.
The backplane must be fully connected to the CCU to correctly locate the mounting screw
hole.
Insert the screw into the pillar on the bracket, which can be seen through the backplane
mounting screw hole.
Mitel 3000 Australia Installation and Maintenance Manual
Mounting screw
hole
14