Mitel 3000 Australia Installation and Maintenance Manual
Door Intercom
The door intercom is cabled to Extension 23, the fourth extension on the CCU. To operate the
door extension it must be programmed in system programming. See the Programming section
in the Administrator's manual.
Doorstrike
The doorstrike port provides a closed relay contact when in the operated condition. The relay
contact is designed for low voltage DC equipment and should not be used for any voltages
greater than those specified within the technical specification.
Connecting a MOH (Music On Hold Module)
Any of the extensions on the system, with the exception of the programming position, can be
programmed as the external music on hold position. The MOH Module is connected to the AB
pair of the extension.
The MOH Module is an optional component and must be ordered in addition to the
system
The MOH Module provides an isolation barrier between the Extension Port and the Music
Source and it MUST be installed if an External Music Source is being connected to an
Extension Circuit
The MOH Module contains:
1. An adhesive pad for mounting in the MDF area of the CCU (see diagram)
2. A "bare wire" lead for connection to the AB connectors of an extension port
3. A 3.5mm Stereo jack for connection to the External Music Source
35