Expansion Module Mdf Connections; Broadband Module Connections - Mitel 300 Installation And Maintenance Manual

Expansion Module MDF Connections

The connections on the Expansion Module are shown below.

Eight four-way Krone connectors for the Extensions

Two four-way Krone connectors for the PSTN Lines. Two lines are terminated on
each connector

Three RJ 45 connectors for the Basic rate ISDN interfaces. Two T
connections and one Internal S

Two 2-pole switches are also provided for the 100 ohm terminating resistance for the
ISDN Basic Rate accesses, SW1 and

Broadband Module connections

The Broadband Module has a built in ADSL modem.
To connect to an ADSL line use the gray lead provided to connect between the ADSL
connector on the MDF and the data port on the splitter.
If connecting to a cable modem or a managed IP network use the blue cable to connect
between the 10/100 Base-T WAN connector and the external router / modem.
Mitel 3000 Australia Installation and Maintenance Manual
connector.
0
SW2.
38
network
0