Connections; Indicators; Reset Button - Mitel 3000 Manual

Mitel 3000
Broadband Module Manual

CONNECTIONS

The following connectors are located under the top cover.
•
ADSL RJ-11.
•
10 Base-T WAN (ETH/DMZ Port) RJ-45.
•
LAN Port 1 RJ-45.
•
LAN Port 2 RJ-45.
•
LAN Port 3 RJ-45.
•
LAN Port 4 RJ-45.

Indicators

There are six indicators (LEDs) on the MDF cover.
•
Heartbeat – steady to indicate normal processor activity.
•
ADSL - a solid light indicates ADSL line synchronisation – flashes with activity.
•
Port 1 - a solid light indicates an Ethernet connection – flashes with activity.
•
Port 2 - a solid light indicates an Ethernet connection – flashes with activity.
•
Port 3 - a solid light indicates an Ethernet connection – flashes with activity.
•
Port 4 - a solid light indicates an Ethernet connection – flashes with activity.
The additional two indicators (LEDs) on the MDF indicate:-
•
X21 - Not used – permanently lit.
•
WAN (ETH/DMZ) - a solid light indicates an Ethernet connection.

Reset Button

The MDF is equipped with a white reset button. When this button is pressed, the module
resets.
4
ADSL
Port 1
Port 2
Port 3
Port 4