Installing The Fixed Cinewide Base Plate (Vx-11D/Cinewide); Vx-11D/Cinewide With Anamorphic Lens Base Plate And Ceiling Mounting Rails - Exploded View - Runco VideoXtreme VX-11d Installation & Operation Manual

Figure 3-9 shows the anamorphic lens base plate assembly for a VX-11d/CineWide.
1
Screw,
Phillips
Pan-Head,
10-32 x
3/8" (8x)
Anamorphic
2
Lens Base Plate
Figure 3-9. VX-11d/CineWide with Anamorphic Lens Base Plate and Ceiling
Mounting Rails - Exploded View
To install the fixed CineWide base plate on a VX-11d/CineWide:
1. Place the projector upside down on a blanket or other soft surface.
2. Place the CineWide base plate on the bottom of the projector.
3. If you are mounting the projector on a ceiling: Line up the three holes on the left
and right mounting rails (included with the projector ceiling mount kit) with those on
the bottom of the projector and CineWide base plate.
4. Secure the CineWide base plate (and ceiling mounting rails, if needed) to the projector
with the Pan-Head Phillips screws provided with the CineWide lens base plate.
1. Do not use the mounting screws provided with the ceiling
Caution
mounting kit. Use only the hardware provided with the CineWide
lens base plate.
2. DO NOT OVER-TIGHTEN THE SCREWS.
Runco VX-11d Installation/Operation Manual
Ceiling Mount
Rails (part of
Ceiling Mount
Kit)
27
Installation
Installing the Fixed
CineWide Base Plate
(VX-11d/CineWide)