Installing The Fixed Cinewide Base Plate (Vx-33D/Cinewide); Mounting The Vx-33D; Floor Mounting (Upright); Ceiling Mounting (Inverted) - Runco VX VIDEO XTREME VX-33D Installation & Operation Manual

Installation
Installing the Fixed
CineWide Base Plate
(VX-33d/CineWide)
3.6

Mounting the VX-33d

Floor Mounting (Upright)

Ceiling Mounting
(Inverted)
➤
To install the fixed CineWide base plate on a VX-33d/CineWide:
1. Place the projector upside down on a blanket or other soft surface.
2. Line up the mounting holes on the lens mount base plate with those on the bottom of
the projector, directly below the primary lens (see Figure 3-9).
3. Secure the base plate to the projector with the screws provided for this purpose.
Figure 3-9. Installing the Fixed CineWide Base Plate
There are several methods for mounting the projector. Depending on your chosen
installation, one method may be more suitable than another.
➤
In typical front and rear screen installations, the projector can be mounted to a secure and
level surface such as a table or cart. Carts are useful when moving a projector during a
presentation or from site to site. If possible, lock the wheels when it's in position to prevent
it from being moved during a presentation.
➤
For fixed installations, and for those that want the projector out of sight or have a limited
space for projector and audience, you can invert the VX-33d and suspend it from the
ceiling using a specially-designed ceiling mount fixture.
CineWide
Base Plate
28
Screw, Phillips
Pan-Head,
M6-1.0 x 12mm (4x)
Runco VX-33d Installation/Operation Manual