After you have installed the AutoScope lens motor, proceed with Mounting the VX-2
(page 28).
To install the fixed CineWide base plate on a VX-2/CineWide:
1. Place the projector upside down on a
blanket or other soft surface.
2. Line up the mounting holes on the lens
mount base plate with those on the
bottom of the projector, directly below
the primary lens.
3. Secure the base plate to the projector
with the screws provided for this
purpose.
Runco VX-2cx/VX-2dcx Owner's Operating Manual
27
Installation
Installing the Fixed
CineWide Base Plate
(VX-2/CineWide)