Runco VideoXtreme VX-11d Installation & Operation Manual page 87

Copied settings are not retained after a power cycle.
Note
• Memory Preset - Paste Settings: To apply the settings on the clipboard to a
different input source, signal format and/or memory preset, do any or all of the
following:
• Switch to another input (for example, from HD1 to HD2).
• Change the output signal format at the source (for example, from 720p/60 to
1080i/60).
• Switch to another Memory Preset (for example, from ISF Night to Custom 1).
Then, select Paste Settings from the Copy/Paste Memory Preset menu. If you want
to keep these new settings, you must save them! (Refer to Save ISF Night/Save
ISF Day on page 70 or Memory Presets on page 62.)
Copy/Paste - Aspect Ratio: You can also copy and paste certain settings, such as
those for lens position (refer to Vertical and Horizontal Lens Shift on page 40), Output
Shift and Image Alignment (refer to page 72) from one aspect ratio or "screen" (refer to
Screen on page 56) to another.
To do this, select Copy/Paste from the Calibration menu, then select Aspect Ratio.
• Aspect Ratio - Copy Settings: Select Copy Settings from the Copy/Paste Aspect
Ratio menu to place the lens position, Output Shift and Image Alignment settings for
the current aspect ratio onto a "clipboard," which is a temporary memory location.
When you do, the message "Settings Copied" briefly appears on-screen. The
Copy/Paste menu then re-appears, indicating the source of the copied settings.
Copied settings are not retained after a power cycle.
Note
• Aspect Ratio - Paste Settings: To apply the lens position, Output Shift and Image
Alignment settings on the clipboard to a different aspect ratio and/or screen, do either
of the following:
• Switch to another aspect ratio (for example, from 16:9 to Cinema).
• Switch from Screen 1 to Screen 2 or vice versa.
Then, select Paste Settings from the Copy/Paste Aspect Ratio menu. The new settings
are saved automatically.
Runco VX-11d Installation/Operation Manual 71
Operation
Copy/Paste
Memory Preset
Aspect Ratio
Aspect Ratio
Copy Settings
Paste Settings
Copied From:
Aspect Ratio 16:9
Screen Screen 1