Runco VideoXtreme VX-11d Installation & Operation Manual page 54

Installation
Connecting an External IR Receiver to the DHD Controller: If infrared signals from
the remote control cannot reach the DHD Controller due to excessive distance or
obstructions such as walls or cabinet doors, you can connect an external IR receiver to
extend the range of the remote control. See Figure 3-20.
IR Sensor
(3.5-mm, mini
phono plug)
Display Control Display Control
IR
HDMI Out HDMI Out
3 3
To Display To Display
PC / Control PC / Control
HDMI Out HDMI Out
4 4 Ethernet Ethernet
Audio Only Audio Only
Figure 3-20. External IR Receiver Connection
Remote Control
IR Repeater
38 Runco VX-11d Installation/Operation Manual