Pptp (Point-To-Point Tunneling Protocol) - Rosewill RNX-N4 User Manual

Wireless Adapter RNX-N4
• Address Mode: PPPoE can be used with a dynamic or static IP address. If you select
the Dynamic IP radio button, then the IIP address in the next field is not required.
However, if you select the Static IP radio button, then the IP address in the next field is
required.
• User Name: Specify the user name which is provided by your ISP.
• Password: Specify the password which is provided by your ISP, and then verify it once
again in the next field.
• Service Name: Specify the name of the ISP.
• Click on the Next button to continue.
• The WAN configuration is complete. Click on the Connect button to connect to the
Internet.

3.1.3 PPTP (Point-to-Point Tunneling Protocol)

16
User Manual