Precautions - Icom IC-A210 Instruction Manual

PRECAUTIONS

R WARNING! NEVER
a headset or other audio accessories at high volume levels.
Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the
volume level or discontinue use.
R WARNING! NEVER
AC outlet or to a power source of more than 28 V DC. Such
a connection will damage the transceiver.
CAUTION: NEVER
power source that is DC fused at more than 10 A. Accidental
reverse connection will be protected by this fuse, higher fuse
values will not give any protection against such accidents
and the transceiver will be damaged.
DO NOT
operate the transceiver near unshielded electri-
cal blasting caps or in an explosive atmosphere.
DO NOT
connect the transceiver to a power source using
reverse polarity. This connection will not only blow fuses but
also may damage the transceiver.
operate the transceiver with
connect the transceiver to an
connect the transceiver to a
DO NOT
place unit in a non-secure place to avoid inad-
vertent use by children.
DO NOT
push the PTT when not actually intending to
transmit.
DO NOT
use or place the transceiver in direct sunlight or
in areas with temperatures below –20°C (–4°F) or above
+55°C (+131°F).
DO NOT
place the transceiver in excessively dusty envi-
ronments.
DO NOT
place the transceiver against walls. This will ob-
struct heat dissipation.
DO NOT
use chemical agents such as benzine or alcohol
when cleaning, as they damage the transceiver surfaces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
FCC caution: Changes or modifications to this transceiver,
not expressly approved by Icom Inc., could void your authority
to operate this transceiver under FCC regulations.
ii