Gps Memory Edit; Memory Protection - Icom IC-A210 Instruction Manual

3
MEMORY OPERATION

■ GPS memory edit

The received GPS memory data is stored in the desired
group memory channel.
NOTE:
The GPS memory data is overwritten if the se-
lected GPS memory channel already contains other data.
q Push [RCL] to enter the memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
w Rotate [O-DIAL] to select the GPS memory channel.
• "GPS" appears.
e Push [MEM] to enter the GPS memory channel edit
mode, then rotate [O-DIAL] to select a desired group
memory.
• "GPS" and airport code blink.
r Push [MEM] to store the GPS memory channel data to
the selected group memory.
t Push [RCL] to exit the memory mode.
18

■ Memory protection

The transceiver has memory protection which inhibits to
the editing (storing, deleting, replacing, etc.) of the memory
group memory channels.
Refer to "Memory Protection" (p. 24) for details.