Programming Channel Tag (Group Memory Channel Only); Channel Tag List - Icom IC-A210 Instruction Manual

3
MEMORY OPERATION
■ Programming channel tag
(Group memory channel only)
The tag name can be set a three character name in addition
to the group number. It is convenient for separating memory
type.
q Push [RCL], then rotate [O-DIAL] to select a desired
group memory channel in the memory mode.
• Rotate [O-DIAL] to select the memory channel type if neces-
sary.
w Push [MEM], then rotate [O-DIAL] to select "CH TAG"
when selecting "LABEL" in "Group memory channel dis-
play" of the menu mode (p. 24)
e Push [MEM], then rotate [DIAL] to select a desired chan-
nel tag.
• The tag type as shown below is selectable.
r Push [MEM] to set the channel tag.
• Selectable tags
___ / TWR / GND / ATS / ATF / APP / ARR / AWS / CLR /
CTF / DEP / FSS / RFS / UNI / MF / OTH / U-1 / U-2
16
RX
GRP01
122.00 127.00
5
CH01 TWR

■ Channel tag list

DISPLAY
TAG
NAME
Group* 1 GPS* 2
_ _ _ YES –
TWR YES YES
GND YES YES
ATS YES YES
ATF YES YES
APP YES YES
ARR YES YES
AWS YES YES
CLR YES YES
CTF YES YES Common Traffic Advisory Frequency
DEP YES YES
FSS YES YES
RFS YES YES
UNI YES YES
MF YES YES
OTH YES –
U-1 YES – User1 setting (Refer to page 26)
U-2 YES – User2 setting (Refer to page 26)
* 1 Group memory, * 2 GPS memory
MEANS
Non-tag
Tower
Ground
ATIS
Air traffic
Approach
Arrival
Automatic Weather Station
Clearance / Delivery
Departure Frequency
Flight Service Station
Remote Flight Service Station
Unicom frequency
Mandatory frequency
Other