Memory/Call Channels; General - Icom IC-E90 Instruction Manual

■ General

The transceiver has 500 memory channels, 50 scan edge
channels and 5 call channels for storage of often-used fre-
quencies.
Memory channels can be named with 6 characters and as-
signed to 18 banks.

MEMORY/CALL CHANNELS

D Memory/call channel contents
The following information can be programmed into memory
or call channels:
• Operating frequency (p. 19)
• Receive mode (p. 21)
• Tuning step (p. 18)
• Duplex direction (DUP or – DUP) with an offset frequency
(p. 31)
• Subaudible tone encoder, tone squelch or DTCS squelch
ON/OFF (pgs. 29, 71)
• Subaudible tone and tone squelch frequencies (p. 72)
• DTCS code with code phase mode (pgs. 65, 72)
• Memory bank (p. 41)
• Memory name (p. 40)
• Scan skip setting (p. 47)
5
t t
34