Memory Bank - Icom IC-E90 Instruction Manual

5
MEMORY/CALL CHANNELS

■ Memory bank

The transceiver has 500 memory channels that can be as-
signed to 18 banks for faster memory access, memory
arrangement, etc.
Each bank (A–H, J, L, N–R, T, U and Y) can be assigned up
to 100 memory channels.
Mch contents
000 51.000 MHz
001 145.000 MHz
002 433.000 MHz
003 145.120 MHz
004 435.340 MHz
005 145.040 MHz
006 433.560 MHz
007 438.480 MHz
008 51.560 MHz
009 1.620 MHz
010 50.140 MHz
011 118.200 MHz
012 76.500 MHz
013 118.125 MHz
014 145.540 MHz
015 436.850 MHz
016 434.720 MHz
017 435.750 MHz
018 432.720 MHz
019 75.795 MHz
020 127.700 MHz
021 146.300 MHz
499 119.870 MHz
41
Memory bank Memory bank contents
A 00–99 144 MHz frequencies
A00
B 00–99 430 MHz frequencies
B00
C 00–99 VHF air frequencies
D 00–99
E 00–99
A01
F 00–99
B01
G 00–99
H 00–99
J 00–99
L 00–99
N 00–99
C00
O 00–99
P 00–99
C01
Q 00–99
A02
R 00–99
T 00–99
B02
U 00–99
Y 00–99
C02
A03
C03
Memory banks are used for arrangement of a memory
channel. When you edit the original memory channel con-
tents, the memory bank contents are updated automati-
cally.
D Setting a memory bank
q Push [MR] to select memory mode.
w Set the desired memory channel with [DIAL].
e Push [MR S.MW] for 1 sec. to indicate a memory channel.
• Memory channel indicator blinks.
• Do not hold [MR S.MW] for more than 2 sec., otherwise the pre-
viously selected VFO will be overwritten.
r Push [CALL/TV] several times to select "BANK."
• Memory bank screen appears.
• Previously programmed memory bank appears, if programmed.
t Push [BAND] to select a memory bank.
• Rotating the tuning dial while pushing [BAND] also selects the
memory bank.
• Select "-- -- -- --" to clear the memory bank information.
y Rotate the tuning dial to select the desired channel.
• Previously used memory bank channel cannot be selected.
u Push [VFO] to program the memory bank channel.