Hitachi SJ2002 Series Instruction Manual page 131

Option Terminal
Function Name
Code Symbol
53 S-ST Special-Set (select)
2nd Motor Data
255 — Not selected
Note 1: When using the Multi-speed Select settings CF1 to CF4, do not display
parameter F001 or change the value of F001 while the inverter is in Run Mode
(motor running). If it is necessary to check the value of F001 during Run
Mode, please monitor D001 instead of F001.
Input Function Summary Table
ON The inverter uses 2nd motor parameters for
generating frequency output to motor. The selec-
tion of 1st or 2nd motor is available during Stop
Mode or Run Mode.
OFF The inverter uses 1st (main) motor parameters
for generating frequency output to motor
ON (input ignored)
OFF (input ignored)
SJ200 Inverter
2
Description
3–51