Table of Contents
Advertisement
Reply to ICMP on WAN port
WAN side HTTP/Telnet
Access
Cloned WAN MAC Address
Enable LAN DHCP
LAN Subnet Mask
LAN DHCP Base IP
LAN DHCP Start IP
LAN DHCP End IP
DHCP IP Lease Time
DMZ IP
Port Forwarding
In addition to the Basic Settings co nfiguration page, end users a lso has access to the De vice Status
page.
T
8: S
P
ABLE
TATUS
AGE
MAC Address
WAN IP Address
Product Model
Software Version
System Up Time
Grandstream Networks, Inc.
If set to "Yes", the GXW40XX will respond to the PING. Default is No.
"Yes" setting may make the gateway vulnerable to a
Note: This option is not present on GXW4024
If set to "Yes", user can access the
instead of through the "PC" port. WARNING: this configuration is less secure than
default option. Default is No.
Note: This option is not present on GXW4024
This allows you to change/set the MAC address on the WAN interface.
Note: This option is not present on GXW4024
Default is Yes.
Note: This option is not present on GXW4024
Sets the LAN subnet mask. Default value is 255.255.255.0
Note: This option is not present on GXW4024
Base IP for the LAN port which functions as a Gateway for the subnet.
Default value is 192.168.2.1.
When the device detects WAN IP is conf licting with LAN IP, the LAN base IP
address will be changed based on the network mask -- the effective sub net will be
increased by 1. For example; 192.168.2.1 will be changed to 1 92.168.3.1 if net
mask is 255.255.255.0. Then the device will reboot
Note: This option is not present on GXW4024
Default is 100
Note: This option is not present on GXW4024
Default is 199
Note: This option is not present on GXW4024
Value is set in units of hours.
address is assigned to the LAN clients.
Note: This option is not present on GXW4024
Forward all WAN IP traffic to a specific IP addr ess if no matchin g port i s used b y
GXW40XX or defined in port forwarding.
Note: This option is not present on GXW4024
Forwards a m atching (TCP/UDP) port to a specific LAN I P address with a specific
(TCP/UDP) port.
Note: This option is not present on GXW4024
The device ID in hexad ecimal format. This is neede d for Internet Service Provid er
troubleshooting. Note: there are separate MAC addresses for the WAN side and
the LAN side. The LAN MAC addr ess will be used for provisioning and can be foun d
on the label on original box and on the label located on the bottom panel of the device.
Shows WAN IP address of GXW40XX
Contains the product model info.
Program: This is the main software release. Boot and Loader are not changed often.
Shows system uptime since the last reboot.
GXW40XX User Manual
Firmware 1.0.5.10
Denial of Service
configuration page through the WAN port,
Default val ue is 120 hrs (5 Day s.) The time IP
attack.
Page 23 of 40
Last Updated: 01/2012
Advertisement
Table of Contents
