LAN/WAN
RJ-45 Ethernet
Ports
FIGURE 1: DIAGRAM OF GXW4004-8 AND GXW4024 BACK PANEL
LAN Port
LAN
Connect the LAN port with an Ethernet cable to your PC.
WAN
Connect to the internal LAN network or router.
RESET
Factory Reset button. Press for 7 seconds to reset factory default settings.
DC 12V
Power adapter connection
CONSOLE
Console connection for a PC.
LINE
When the unit loses power or unit became unregistered, FXS port 1 will be able to
make/receive calls from the PSTN line connected to this port.
FXS1 – FXS24
FXS port to be connected to analog phones / fax machines.
Note: Once the GXW40xx is turned on and configured, the front display panel indicates the status of the
unit.
FIRMWARE VERSION 1.0.9.1
GXW 400x
PSTN
Power
Console
Reset
Line
Supply
Connection
(PC
connection)
GXW 4024
xx
TABLE 1: DEFINITIONS OF THE GXW CONNECTORS
GXW40XX USER MANUAL
FXS
Ports
FXS
Ports
50 PIN Telco
Connector
Page 10 of 60