Table 9: Advanced Settings - Grandstream Networks GXW-4004 User Manual

Port Status
Advanced User configuration includes not only the end user configuration, but also advanced
configurations such as:
miscellaneous configuration.
Admin Password
Layer 3 QoS
Layer 2 QoS
STUN Server
Keep-alive interval
FIRMWARE VERSION 1.0.9.1
Displays relevant information regarding the individual FXS ports. Example:
Port Hook Registration
FXS1 On Hook Registered
FXS2 Off Hook Registered
FXS3 On Hook
Registered
FXS24 On Hook Registered
** FXS port 24 user has set Do Not Disturb.
FXS port 1 user has set his calls to be forwarded unconditionally to ext 613
FXS port 2 user has set his calls to be forwarded to 614 when his phone is busy.
FXS port 3 user is not registered with his SIP Server.
SIP configuration, Codec selection, NAT Traversal Setting and other

TABLE 9: ADVANCED SETTINGS

Administrator password.
Settings" page. Password field is purposely left blank for security reasons after
clicking update and saved. The maximum password length is 25 characters.
This field defines the layer 3 QoS parameter which can be the value used for IP
Precedence or Diff-Serv or MPLS. Default value is 48.
Value used for layer 2 VLAN tag. Default setting is blank.
IP address or Domain name of the STUN server.
STUN server assists devices behind a NAT firewall or a router to set up calls via
VoIP.
STUN server is often provided by the VoIP service provider or a public STUN server
can be used. For a sample list of public free STUN servers please refer to:
http://www.voip-info.org/wiki-STUN
This parameter specifies the number of seconds after which a new blank UDP
packet will be sent out to the proxy/server port in order to have the port stay open
and the device remain reachable. Default is 20 seconds.
GXW40XX USER MANUAL
DND Forward
No 613
No
Not
No
Yes
Only the administrator can configure the "Advanced
Busy Delayed
Forward Forward
614
615
Page 36 of 60