Configuration Guide; Configuring Gxw40Xx Via Voice Prompt; Configuring Gxw40Xx With Web Browser - Grandstream Networks GXW-4004 User Manual

CONFIGURING GXW40XX VIA VOICE PROMPT

DHCP M
ODE
Select voice menu option 01 to enable GXW40XX to use DHCP.
STATIC IP M
ODE
Select voice menu option 01 to enable GXW40XX to use STATIC IP mode, then use option 02, 03, 04, 05
to set up IP address, Subnet Mask, Gateway and DNS server respectively.
F S IP A
IRMWARE ERVER DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C S IP A
ONFIGURATION ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U P
PGRADE ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F U M
IRMWARE PGRADE ODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
WAN P W A
ORT EB CCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

CONFIGURING GXW40XX WITH WEB BROWSER

The GXW40XX series gateway has an embedded Web server that allows users to configure the
GXW40XX through a web browser.
FIRMWARE VERSION 1.0.9.1

CONFIGURATION GUIDE

DDRESS
(
Note: This option is not present on GXW4024 gateway)
GXW40XX USER MANUAL Page 29 of 60