Unpack and check all accessories. Equipment included in the package:
1) One GXW410x Unit
2) One universal power adaptor
3) One Ethernet cable
CONNECTING THE GXW410X
LAN/WAN
Ethernet Ports
LAN (
PC)
OR
WAN
VIDEO IN
RESET
POWER SUPPLY
OFF/ON
FXO1 - FXO8
NOTE: GXW410x acts as bridge only, if a device is connected to the LAN port, this device will get an ip
in same subnet as the WAN IP (NAT is disabled).
Grandstream Networks, Inc.
Firmware Version 1.4.1.5
PACKAGING
FIGURE 1: DIAGRAM OF GXW410X BACK PANEL
GXW410x
Power Supply
RJ-45
On/Off Switch
VIDEO IN Jack
TABLE 1: DEFINITIONS OF THE GXW CONNECTORS
C
PC
ONNECT YOUR
TO THIS PORT
R
/DHCP S
. T
OUTER
ERVER
C
ONNECT TO THE INTERNAL
Connection for Analog based Video Surveillance Camera (RCA)
A
HW
VAILABLE IN
REVISION
Factory Reset button. Press for 7 seconds to reset factory default settings.
Power adapter connection
Off/On switch
FXO ports to be connected to physical PSTN lines from a traditional PSTN PBX or
PSTN Central Office.
GXW410x User Manual
FXO Ports
. I
T WILL THEN BE ASSIGNED AN
GXW410
HE
X ACTS AS A SWITCH ONLY
LAN
P
I
NETWORK OR
UBLIC
NTERNET
1 O
NLY
IP
ADDRESS FROM YOUR
.
.
Page 6 of 32
Last Updated: 5/2014