Qlogic SANbox 5802V QuickTools Switch Management User Manual page 110

5 – Managing Ports
Port Information Data Window
Port Speed Supported
Symbolic Name
Diag Status
Diag Fault Code
Test Status
Test Fault Code
MFS Mode
I/O Stream Guard
Device Scan
Auto Performance Tuning
AL Fairness
Port Binding
Upstream ISL
Downstream ISL
Extended Credits Requested
5-4
Table 5-1. Port Information Data Window Entries (Continued)
Entry
Extended Credits Group
The speeds supported by the port
Port symbolic name
Status from the most recent Power On Self
Test
Fault code from the most recent Power On
Self Test
Status from the most recent port test
Fault code from the most recent port test
Advanced Group
Multiple Frame Sequence bundling status.
RSCN message suppression status. Sta-
tus can be enabled, disabled, or automati-
cally determined by the switch.
Device scan status. Enabled means the
switch queries the connected device dur-
ing login for FC-4 descriptor information.
Enables the switch to dynamically control
the MFS_Enable, VI_Enable and
LCF_Enable features based on the opera-
tional state of the port.
Controls how frequently the switch can
arbitrate for access. Applies only affects
ports running in loop (FL) mode.
N/A - does not apply to this switch
The ISL over which the switch sends
requests intended for the principal switch
The ISL over which the switch has
received requests intended for the princi-
pal switch.
Number of requested credits
S
Description
59264-00 A