Edit Zoning Dialog Tool Bar Buttons And Icons - Qlogic SANbox 5802V QuickTools Switch Management User Manual

A
NOTE:
If the Merge Auto Save parameter is enabled on the Zoning Configuration
dialog, then every time the active zone set changes, the switch will copy it
into an inactive zone set stored on the switch. You can edit this copy of the
active zone set stored on the switch, and activate the updated copy to
conveniently apply the changes to the active zone set. The edited copy then
becomes the active zone set.
The Edit Zoning dialog has a Zone Sets tree on the left and a Port/Device (or
members) tree on the right. Both trees use display conventions similar to the
fabric tree for expanding and contracting zone sets, zones, and ports. An
expanded port shows the port Fibre Channel address; an expanded address
shows the port World Wide Name. You can select zone sets, zones, and ports in
the following ways:
Click a zone, zone set, or port icon.
Right-click to select a zone set or zone, and open the corresponding popup
menu.
Press the Shift key while clicking several consecutive icons.
Press the Control key while clicking several non-consecutive icons.
Using tool bar buttons, popup menus, or a drag-and-drop method, you can create
and manage zone sets and zones in the zoning database.
zoning tool bar operations.
Use the Edit Zoning dialog to define zoning changes, and click the Apply button
to open the Error Check dialog. Click the Error Check button to have QuickTools
check for zoning conflicts, such as empty zones, aliases, or zone sets, and zones
with non-domain ID/port number membership. Click the Save Zoning button to
implement the changes. Click the Close button to close the Error Check dialog.
On the Edit Zoning dialog, click the Close button to close the Edit Zoning dialog.
Button/Icon
59264-00 A
Table 3-3. Edit Zoning Dialog Tool Bar Buttons and Icons
Create Zone Set button
Create Zone button
Table 3-3
Description
—
creates a new zone set
—
creates a new zone
3 – Managing Fabrics
Zoning
describes the
3-21