Using Call Home; Call Home Setup Dialog; Call Home Setup Entries - Qlogic SANbox 5802V QuickTools Switch Management User Manual

A

Using Call Home

The Call Home feature allows you to configure switches to send Email, and alerts
and events to pagers. You can configure the type of events and where the alerts
are sent. Use the Call Home Setup dialog shown in
home parameters. To display the Call Home Setup dialog, open the Switch menu,
select Call Home, and select Setup.
Table 4-9
Primary SMTP: (active)
Primary SMTP Server
Address:
59264-00 A
Figure 4-14 Call Home Setup Dialog
lists the entries in the Call Home Setup dialog.
Table 4-9. Call Home Setup Entries
Entry
The "(active)" indicates the Primary SMTP (Simple Mail
Transfer Protocol) is the SMTP server that CallHome is
going to try to use when transmitting Email messages.
CallHome operates as an SMTP client, or more correctly,
and SMTP sending agent.
After any system configuration, the Primary SMTP server
will always become the active SMTP, provided it is
enabled and has a non-default address defined (0.0.0.0 is
the default).
This is the IP address of the primary (first) SMTP server.
4 – Managing Switches
Using Call Home
Figure 4-14 to configure call
Description
4-37