Managing System Services; System Services Dialog - Qlogic SANbox 5802V QuickTools Switch Management User Manual

A

Managing System Services

The System Services dialog provides a central location for you to enable or
disable any of the external user services such as Simple Network Management
Protocol (SNMP), embedded web applet, command line interface, Network Time
Protocol (NTP), Common Information Model (CIM), and Call Home. To display the
System Services dialog, open the Switch menu and select Services.
Use caution when disabling the Embedded GUI, GUI Mgmt, and Telnet, as it is
possible to disable all access to the switch except through a serial connection.
Embedded GUI (Graphical User Interface) — allows users to point a
browser at the switch and use the QuickTools web applet.
GUI Mgmt — allows out-of-band management of the switch from the switch
management application (GUI). If disabled, the switch can not be specified
as the entry switch for a fabric in the GUI, but can still be managed through
an in-band connection.
59264-00 A
Figure 4-9 System Services Dialog
4 – Managing Switches
Configuring a Switch
4-21