Qlogic SANsurfer FC HBA Manager User Manual page 136

Troubleshooting
Tracing SANsurfer FC HBA Manager and Agent Activity (Debug)
5. Open a second terminal to start the SANsurfer FC HBA Manager user
interface. Connect to the host with SANsurfer FC HBA Manager.
6. On the terminal you opened in
agent. This causes the agent to clean up and terminate.
NOTE:
For a NetWare system, the qlremote.log is already exported.
7-22
Step 1, press CTRL+C to stop the qlremote
S
SN0054651-00 G