Host Icons And Text; Adapter Icons And Text - Qlogic SANsurfer FC HBA Manager User Manual

A

Host Icons and Text

The FC/CNA HBA tree shows the following information about hosts:
Host status: Live or offline.
Host name: Host name or IP address.
For example:
Host icons:
connection between the user interface and the agent is active for this host.
An online host can be remote or local.
inactive for this host. The configuration for this host can be loaded from a
QLC file (see "Viewing a Saved Host Configuration from a File" in the help
system) or a text file (see "Viewing a Saved Host Configuration from a Text
File" in the help system).

Adapter Icons and Text

The FC/CNA HBA tree shows the following information about adapters:
Adapter model: For example, QLA2xxx or QLA2xxx/2xxx.
Adapter alias: User-defined alias name, if assigned. For more information,
see "Displaying Adapter Information" in the help system.
Loop down: Indicates that the adapter does not have synchronization
(cable disconnected, connection mode set incorrectly, and so on).
Adapter status: Indicates a status such as a severe/critical alarm, loop
down, warning alarm, or good (no alarm). For information about alarms, see
"Viewing and Managing the Adapter Event Log" in the help system.
Examples:
SN0054651-00 G
hostname 10.3.13.90
Online host. The blinking heart on the host icon indicates that the
Indicates a remote host.
Indicates a local host.
Offline host. The connection between the user interface and the agent is
HBA QLA2342:QLogic's HBA:Warning
HBA QLA2342:Good
SANsurfer FC HBA Manager Main Window
Getting Started
5-9