Qlogic SANsurfer FC HBA Manager User Manual page 131

A
SN0054651-00 G
Tracing SANsurfer FC HBA Manager and Agent Activity (Debug)
Edit the file so that the information appears on the console. Change
the following properties:
lax.stderr.redirect=console
lax.stdout.redirect=console
lax.stdin.redirect=console
Edit the file so that the information is saved to a file as shown for your
operating system:
For a system, the location could be:
lax.stderr.redirect=c:\\trace.txt
lax.stdout.redirect=c:\\trace.txt
lax.stdin.redirect=c:\\trace.txt
For a Red Hat/SUSE Linux or Solaris SPARC/x86 system, the
location could be:
lax.stderr.redirect=/trace.txt
lax.stdout.redirect=/trace.txt
lax.stdin.redirect=/trace.txt
Figure 7-4 shows an example.
Troubleshooting
7-17