Installation Instructions - Qlogic SANsurfer FC HBA Manager User Manual

A

Installation Instructions

The SANsurfer installer is a self-extracting utility that installs SANsurfer FC HBA
Manager and related files.
NOTE:
If you are installing SANsurfer on a Macintosh, download the StuffIt
expand the contents. After the contents are expanded, double-click the
Install icon using the Finder™.
If the utility is already installed, you may want to perform routine Web/CD based
updates.
If you are installing the SANsurfer FC HBA Manager agent on a NetWare server,
note the following:
You cannot install the SANsurfer FC HBA Manager agent directly on a
NetWare server; you must install the agent from a Windows system
connected to the NetWare server.
Prerequisites for each NetWare server:
Perform the following steps to install SANsurfer FC HBA Manager on your system
or on the NetWare server connected to this system.
SN0054651-00 G
Connect a Windows system to the NetWare server through the TCP/IP
network.
On the Windows system, map a drive to the NetWare server system
volume (sys:\).
Installing SANsurfer FC HBA Manager
Initial Installation
®
file and
4-3