Verifying That Qlremote Is Installed And Running; Windows: Services - Qlogic SANsurfer FC HBA Manager User Manual

A

Verifying that qlremote is Installed and Running

If the qlremote agent is not installed, loaded, or running, several SANsurfer FC
HBA Manager problems can occur. To determine if qlremote is installed and
running, follow the procedure for your operating system.
NOTE:
On Windows and Linux, you can update the qlremote agent using SANsurfer
FC HBA Manager. See "Updating the qlremote Agent" in the help system.
To verify that qlremote is installed and running on Windows:
1. Open the Component Services window
2. Verify that the QLogic Management Suite Java agent service
(QLManagementAgentJava) is running.
To verify that qlremote is installed and running on NetWare:
1. At the server command prompt, type the following command and then press
ENTER:
modules q*
2. Verify that qlremote.nlm is loaded.
SN0054651-00 G
Figure 7-1 Windows: Services
Verifying that qlremote is Installed and Running
(Figure 7-1).
Troubleshooting
7-13