Yamaha RX-V1400 Owner's Manual page 80

_ @0(t RX-VI400U EN.book Page 76 Thursday, July 10, 20(13
12:17 AM
• DIALG.LIFT (Dialog lift)
Function: This parameler adjusts the height of the front and cenler channel sounds by assigning some of the front
and cenler channel elements to the presence speakers.
Description: The larger the parameter, the higher the position of the front and cenler channel sound.
Choices: 0/112/314/5, initial setting is 3.
For 7ch Stereo
Function:
These parameter adjusts
the volume level for each channel in 7-channel slereo mode.
Control Range: 0- 100%
• CT LEVEL (Center level)
• SL LEVEL (Surround left level)
• SR LEVEL (Surround right level)
• SB LEVEL (Surround back level)
• PR LEVEL (Presence level)
+
For PRO LOGIC II Music
• PANORAMA
Function: Extends the front stereo image to include the surround speakers for wraparound effect.
Choices: OFF/ON, initial setting is OFF.
• DIMENSION
Function: Gradually adjusts the sound field either towards the front or towards the rear.
Control range: -3 (towards the rear) to +3 (towm'ds the front), initial setting is STD (standard).
• CT WIDTH
(Center width)
Function: Adjusts the cenler image from all three front speakers to varying degrees. A larger value adjusts the
center image towards the front lefl and right speakers.
Control range: 0 (center channel sound is oulput only from cenler speaker) to 7 (cenler channel sound is output only
from front lefl and right speakers), initial setting is 3.
+
For DTS Neo:6 Music
• C. IMAGE (Center image)
Function: This parameter adjusts the center image from all three front speakers to varying degrees.
Control range: 0-0.5
For THX Cinema
• DEC (2ch Decoder Select)
Function: Selects the decoder used to playback 2-channel sources using THX Cinema.
Choices: PRO LOGIC / PLII Movie / Neo:6 Cinema
76