_
@00
RX-VI40(IU
EN.book
Page
14 Thursday,
July
10, 20(13
12:17
AM
•
FRONT
terminals
Connect one or two speaker syslems to these lerminals. If
you use only one speaker syslem, connect it Io either of
the FRONT A or B lerminals.
•
CENTER
terminals
Connect a center speaker to these terminals.
•
SURROUND
terminals
Connect surround speakers to these terminals.
The Canada model cannot output to two separate speaker systems
simuhaneously.
Bi-wired
connection
The unit also allows
you to make bi-wired
connections
to
one speaker
syslem.
Use two pairs of speaker
cables
for
each speaker (one pair fi_r the woofer and one pair fi_r the tweeter/
mid=range). To use the bi=wired connections,
press SPEAKERS
A and SPEAKERS
B on the t?ont panel so that both SPA
and
B light up on the front panel display.
Bi-wired connection
V
This unit
•
SUBWOOFER
jack
Connect a subwoofer wilh buill=in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
•
SURROUND
BACK terminals
Connect surround back speakers to these terminals. If you
only connect one surround back speaker, connect it Io Ihe
lefl (L) terminals.
•
PRESENCE terminals
Connect
presence
speakers
1o these lerminals.
* If you are using either U.S.A., Canada or Australia model, you
can also use these speakers as Z_me 2 speakers (see page 57).
14