Yamaha RX-V1400 Owner's Manual page 50

_ @0(t RX-VI400U EN.book Page 46 Thursday, July 10, 20(13
12:17 AM
_ittlV,_|#lOl_ttloI_d_gF,_ll[oi#_
You can use the lest tone feature lo manually balance your
speaker levels, Please note that this operation will override
the level adjustments made in "AUTO SETUP" (page 24),
"Speaker level" (page 50) and "Manually adjusting
speaker levels" (page 45). Use the lest lone lo set speaker
levels so that the volume from each speaker is identical
when heard from your lislening position.
+
1
Press AMP to select the AMP mode.
2 Press TEST.
The unit will output a test tone.
3
Press/x ! v repeatedly to select the speaker
you want to adjust.
TEST LEFT
TEST CENTER
TEST RIGHT
TEST R SUR.
TEST R SUR. B
TEST L SUR. B
TEST L SUR.
TEST SUBWOOFER
Front lefl speaker
Center speaker
Front right speaker
Right surround speaker
Right surround back speaker
Lefl sun'ound back speaker
Eefl surround
Subwoofer
4
Press < / > to adjust speaker volumes.
5 Press TEST when you have completed your
adjustment.
The lest |one slops.
.%,..
• Use a handheld SPL meter, hold at arms length and point
upwards so that the mete_ is in the listening position. With the
meter set to the 70 dB scale and to C SLOW, calibrate each
speaker to 75 dB.
• BefOre outpu_ting the test tone, we recommend that you set the
output volume to 0 dB.
+
You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES jack.
46