Yamaha RX-V1400 Owner's Manual page 34

_ _0(t RX-VI4L_)U EN.book Page 30 Thursday, July 10, 2003
¢
12:17 AM
+
1 4 0
3
(U.S.A. model)
7
_6
:7
1
Press STANDBY/ON (SYSTEM POWER on the
remote control) to turn on the power.
SYSTEI_
POWER
or
Front panel Remote control
2 Turn on the video monitor connected to this
unit.
3
Press SPEAKERS A or B on the front panel.
Each press turns the respective speakers on or oft'.
ASPEAKERS B
When bi-wiring, select both A and B.
Select the input source.
Use INPUT (or press one of the input selector buttons
on the remote control) to select the input you desire.
O
Front panel
Go © o
Remote control
The current input source name and input mode appear
in the front panel display and video monitor for a few
seconds.
_!j!llll
r% t t _*,. =_= i i "T" t-
Selected input source Input mode
5 Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the component.
0
Front panel
Adjust the volume to the desired output level.
o
- ?
Remote control
7
Select a sound field program if desired.
Use PROGRAM (or press AMP m select the AMP
mode, then press one of the sound field program
buttons repealedly) Io select a sound field program.
See page 41 for details about sound field programs.
Front panel Remote control
+
When this unit detects Dolby Digital signals, the following
display appears for a few seconds. This shows how the signal
level is being corrected to become -27 dB (THX
recommendation).
O J,a iNorr,_.. +4dB
¢
30