Yamaha RX-V1400 Owner's Manual page 51

_ @00 RX-VI4OI)U EN.book Page 47 Thursday, July 10, 2003
12:17 AM
+
You can use the following parameters in the set menu to adjust a variety of system settings and customize the way this
unit operates. Change the initial settings (indicated in hold under each parameter) to reflect Ihe needs of your listening
environment.
• Auto Setup
Use to specify which speaker parameters auto setup will adjust, and 1o activate Ihe aulo setup procedure (see page 24).
• Manual Setup
Use to manually adjust speaker and system settings.
.,+,.
Most of the parameters described in the SOUND menu are set automatically when you run auto setup (see page 24). You can use the
SOUND menu m make further adjustments, but we recommend running auto setup first.
Basic menu
Use to quickly setup basic system parameters (see page 28).
Sound menu
Use to manually adjust any speaker setting or compensate for video signal processing delays when using LCD monilors
or projectors.
Item
SPEAKER SET
Features Page
Selects the output mode suitable for each speaker, lhe speakers for low-frequency signat output, 49
and the cross over ti'equency.
SP LEOEL Adjusts the output level of each speaker. 50
SP DISTANCE Adjusts the delay time of each speaker. 51
GRnPHIC EQ Adjusts the tonal quality of each speaker. 51
LPE LEOEL Adjusts the output level of the LFE channel for Dolby Digital or DTS signals. 51
0E'E'ENFt['I
I C RANGE
Adjusts the dynamic range for Dolby Digital or DTS signals. 52
L01,,,I FRQ. TEST Malches the subwoofcr level with the level of lhe olher speakers. 52
HP TONE CTRL Adjuststhelonalbalanceoflheheadphones. 53
AUDIO SET Customizes overatl audio settings of this unit. 53
PRiSBc.h _ELECT Selects priority to either surround back or presence speakers when both sets of speakers are 53
connected to this unit.
Input menu
Use to reassign digital input/outputs, select the input mode, rename your inputs, or specify external input settings.
Item Features Page
IiO A_ ]_L_N ,_..ssignsjacks according to the component to be used. 54
I NPUT NODE
Selects the initial input mode of _he sotlrce. 54
INPUT
RENRME Changes the name of the inputs. 55
E_':', T. INPUT
Sets the direction of the signals input into _he center, subwool_r and SmTOundchannels for lhe 55
source component connected to the MULTI CH INPUT jacks.
+