Yamaha RX-V1400 Owner's Manual page 49

_ @00 RX-VI40llU EN.book Page 45 Thursday, July 10,20(13
?
12:17 AM
,rm]rl'_ T &_[_mlOl¢l,_.*¥±Ifl[el_Tl
• Canceling the sleep timer
Press SLEEP repeatedly until "SLEEP OFF" appears on
the front panel display.
After a few seconds, "SLEEP OFF" disappears, and the
"SLEEP" indicator goes off.
SLEEP
SLEEP OFF"
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the front
You can adjust the output level of each speaker while
lislening to a music source. This is also possible when
playing sources through the MULTI CH INPUT jacks.
Please note thai this operation will override the level
adjustments made in "AUTO SETUP" (page 24),
"Speaker level" (page 50) and "Using the lest lone"
(page 46).
-1
panel) to set this unit to the standby mode.
+
3
1
Press AMP to select the AMP
mode,
2 Press LEVEL repeatedly to select LEVEL
the speaker you want to adjust.
FRONT L
CENTER
FRONT R
SUR,R
SUR,B,R
SUR,B.L
SURoL
SWFR
PRES
Front lefl speaker level
Center speaker level
Front right speaker level
Surround right speaker level
Surround back right speaker level
Surround back lefl speaker level
Surround left speaker level
Subwoofer level
Presence speaker level
Once you press LEVEL, you can also select the speaker by
pressing/x / v.
1
Press < / > to adjust the speaker output level.
• The control range is from +10dB to-10dB.
+
• When inputting digital signals with sampling fi'equencies higher
than 48 kHz, only the subwoof_r level can be adjusted.
45