Yamaha RX-V1400 Owner's Manual page 61

_ @00 RX-VI400U EN.book Page 57 Thursday, July 10,2003
12:17 AM
• Parameter initialization PARRM° INI
Use this fealure 1o initialize the paramelers for each sound
field program within a sound field program group. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
MANUAL SETUP > OPTION MENU > PARAM. INI >
Press the corresponding numeric button for the sound field
program that you want to initialize.
An aslerisk (*) next to a program number means that the
parameter values have been changed from their initial
settings.
i 2 3 _4
_5 6
7 8
9 *1@ ii
+
• You cannot automatically revert to the previous parameter
settings once you initialize a sound field program group.
• You cannot separately initialize individual sound field
programs.
• You cannot initialize any program groups when MEMORY
GUARD is set to ON.
•
Speaker impedance setting
SP IMP.SET
Use to select the impedance of your speakers.
MANUAL SETUP > OPTION MENU > SP IMI_SET >
E [_F I[,_F _PI
HiniNum
8ohm_
-/+ : Seleot
Choices: 6ohms, 8ohms
•
Zone set ZONE SET
Use to specify the location of speakers connected the
SPEAKERS B terminals,
MANUAL SETUP > OPTION MENU > ZONE SET>
_1 _ _
SPB ...... F RONI
-/+ : Seleot
SPB
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: FRONT, ZONE B
• Select FRONT to turn on!off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
lerminals are set in the main room.
• Select ZONE B if the speakers connecled to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned OFF and SPEAKERS B is
turned ON, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
• If you connect headphones to the PHONES jack on the unit, the
sound is output fi'om bmh headphones and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual Cinema DSP mode.
•
Zone2 set
ZONE2 SET
(U,S.A., Canada and Australia models only)
MANUAL SETUP > OPT_tON MENU > ZONE2 SET >
#,.'_u_'_Lz _Li
OUfPOf UOL..U_R.
ZONE2 _HP...OFF
-/+ : Seleot
Output volume OIJTPIJT _ ZL
Use to select how the volume control will operate with
regard m the ZONE 2 OUTPUT jacks.
Choices: VAN., FIX
• Select VAR. to adjust the ZONE 2 OUTPUT volume
simultaneously with VOL -/+ on the remote control.
• Select FIX to fix the ZONE 2 OUTPUT volume level
Io a standard line level.
Zone2 amplifier
ZONE2
RMP
Use to select how the ZONE 2 speakers will be amplified,
Choices: ON, OFF.
• Select OFF if you do not use Zone 2 speakers or if you
connect your Zone 2 speakers through an exlernal
amplifiers connected to this unit's ZONE 2 OUTPUT
jacks.
• Select ON to use this unit's inlernal amplifier if you
connect your Zone 2 speakers directly to this unit's
PRESENCE/ZONE 2 speaker terminals.
t
+
57