Yamaha RX-V1400 Owner's Manual page 39

_ _0{t RX-VI400U EN.book Page 35
Thursday, July 10,2003 12:17 AM
+
• When you play DTS encoded sources with the input mode set to
AUTO;
--This unit automatically switches to the DTS decoding mode.
The unit remains in DTS mode (and the "_" indicator may
flash) tot up to 30 second after playback of the DTS source is
complete. To manually release the DTS mode, press INPUT
MODE m reselect AUTO.
-- The DTS decoding mode may be released if search or skip
operations are performed lk_r more than 30 seconds. To
prevent this, press INPUT MODE to select DTS.
• If the digital output data of the player has been processed in any
way, you may not be able to perlk_rm DTS decoding even if you
make a digital connection between this unit and the player.
Displaying the information about the input
source
Youcan display the type, formal and sampling frequency
of the currant input signal.
1
Select the input source.
2
Press AMP to select the AMP mode, then
press STRAIGHT/EFFECT so that
"STRAIGHT" appears in the display.
A_p STRAIGHT
then
3 Press A / v to display the following
information about the input signal.
r.at.e
_'l'a
Signal formal display. When the unit
cannol detect a digital signal it
aulomafically switehes to analog input.
Number of source channels in the input
signal. For example, a multi-channel
sounOrack with 3 front channels, 2
surround channels and LFE, is
displayed as "3!2/LFE".
Sampling frequency. When the unit is
unable 1o detect the sampling
frequency "Unknown" appears.
Bit rate. When the unit is unable to
detect the bit rate "Unknown" appears.
Flag data encoded with DTS or Dolby
Digital signals that cue this unit to
automatically switeh decoders.
+