The Epicenter Client Login Window - Extreme Networks EPICenter Guide Manual

Getting Started with EPICenter
Figure 2: EPICenter Start-up page
3 In the left-hand column, click the Launch EPICenter link to display the EPICenter login page.
Starting the EPICenter Client in a Solaris Environment
To start the EPICenter client in a Solaris environment:
1 Set the current directory:
cd <install_dir>
is the directory (path) where you installed the EPICenter components. If you
<install_dir>
installed in the default directory, the path is
2 Execute the command
runclient &
Only the stand-alone client is supported in a Solaris environment.

The EPICenter Client Login Window

The EPICenter installed client starts by opening a Client Login window, as shown in Figure 3.
28
/opt/extreme/epc5_0
runclient
.
EPICenter Concepts and Solutions Guide