Extreme Networks EPICenter Guide Manual page 45

Example: Filtering the Alarm Log Display for a Device IP Address
Filter the list of alarms to view only alarms from the device at IP address 10.210.12.8
1 Click the Filter button at the top of the Alarm Summary window.
The Define Alarm Log Filter window opens.
Figure 12: The Alarm Log filter definition window
2 Uncheck the View last 300 alarms checkbox.
3 From the drop-down menu in the Field field, select Source IP.
4 Enter the IP address into Value field.
5 Click Add/Modify Condition. This adds the condition "Source IP = 10.210.12.8" to the list of
conditions that EPICenter will use to filter the alarm list.
6 Click OK to display the alarms that match this filter.
The Alarm Summary is refreshed to show only the alarms that match your filter.
EPICenter Concepts and Solutions Guide
Using the EPICenter Alarm System
45