The Vlanmgr Utility; Using The Vlanmgr Command - Extreme Networks EPICenter Guide Manual

TransferMgr -host snoopy -port 81 -user master -password king -upload -a -dip
10.20.30.40
Assuming the default location for the TFTP root directory, and assuming that this command was
executed on July 24, 2001 at 10:02 AM, this will place the device configuration information in the file
\Program Files\Extreme Networks\EPICenter
6.0\user.war\tftp\configs\2001\07\24\10_20_30_40_1002.txt
To download version 6.1.8 b11 of the ExtremeWare to an i-series device, enter the following
●
command:
TransferMgr -user admin -software v618b11.xtr -dip 10.20.30.40

The VlanMgr Utility

The VLAN Manager utility (VlanMgr) allows you to create and delete VLANs. These commands
configure the VLANs on the specified switches as well as adding the VLAN information to the
EPICenter database.

Using the VlanMgr Command

The VlanMgr utility is located in the EPICenter
By default this is
\Program Files\Extreme Networks\EPICenter 6.0\client\bin
opt/ExtremeNetworks/EPICenter6.0/client/bin
This command includes options for specifying EPICenter server access information, the operation to be
performed (create, modify or delete), the name of the VLAN, and the devices in the VLAN with their
configuration options.
The syntax of the command is as follows:
VlanMgr -user <EPICenter username> -create <VLAN name> -dip
<IP address> <other options> {-dip <IP address> <other options>} ...
VlanMgr -user <EPICenter username> -modify <VLAN name> -dip
<IP address> <other options> {-dip <IP address> <other options>} ...
VlanMgr -user <EPICenter username> -delete <VLAN name>
The EPICenter user name and one of the main options (
The option is required for a create or modify command. Other options are optional.
-dip
EPICenter Concepts and Solutions Guide
.
directory,
bin <EPICenter_install_dir>/client/bin
in a UNIX environment.
,
-create -modify
The VlanMgr Utility
in Windows, or
, or ) are required.
-delete
.
/
255