Extreme Networks EPICenter Guide Manual page 138

Tuning and Debugging EPICenter
</table>
<table>
<oid name="variableName2" dataLabel="Label/description" />
<oid name="variableName3" dataLabel="Label/description" />
</table>
<scalar>
<oid name="scalarVariable1" dataLabel="Label/description" />
<oid name="scalarVariable2" dataLabel="Label/description" />
</scalar>
<scope ipAddress="123.234.345.456" />
<scope ipAddress="123.234.345.789" />
</collection>
</collections>
Within the outermost
bracketed with
The collection properties must be defined in the collection statement at the beginning of each collection
definition:
Table 6: Control properties for a MIB collection specification
name
pollingIntervalInSecs
initialState
saveData
maxPollsPerDevice
deletePercentage
Table OIDs are defined in
statements. OIDs from different tables must be put in separate
the statement appears in the MIB Collections Detail report, and as a heading in the exported data file.
Scalar OIDs are defined in
statement.
The devices that should be polled are specified by IP address in <
one for each IP address.
The completed file must be named
Reload button in the MIB Poller Summary report will load the collections.xml specification, and begin
the collection process if the
Figure 62 on page 142
138
statement, you can define multiple individual collections, each
collections
<collection name= ... > </collection>
A name for the collection
The interval at which EPICenter should poll for the variables defined in this collection
Whether this collection should start running immediately upon loading (values are
"running" and "stopped")
Whether the collected data should be saved to the EPICenter database ("yes" or "no")
The maximum number of poll result sets that should be saved in the database
The percentage of the saved data that should be deleted when the file reaches it
specified limit
statements, included between
<oid ... >
<oid ... >
collections.xml
initialState
shows an example of an actual
<table>
statements included between a
, and placed in the user/collections directory. The
property specifies "running."
collections.xml
and
<table> </table>
statements. The label portion of
and
<scalar> </scalar>
scope ipAddress ...>
file.
EPICenter Concepts and Solutions Guide
statements,