Extreme Networks EPICenter Guide Manual page 27

Starting the EPICenter Client in a Windows Environment
To start the EPICenter stand-alone client:
1 From the Start menu, highlight Programs > Extreme Networks > EPICenter 6.0, then select
EPICenter 6.0 Client
The EPICenter Client Login window appears, as shown in
You can also start the client from the command line by executing
<EPIC_install_dir>/client/bin
Starting the EPICenter Client in a Linux or Solaris Environment
To start the EPICenter client in a Linux or Solaris environment:
1 Set the current directory:
cd <EPIC_install_dir>/client/bin
<EPIC_install_dir>
installed in the default directory, the path is
2 Execute the command
runclient &
Starting the EPICenter Browser Client
To start the EPICenter client in a browser window:
1 Launch your web browser.
2 Enter the URL for your EPICenter server, in the form:
http://<host>:<port>/
In the URL, replace
<host>
Replace with the TCP port number that you assigned to the EPICenter Web Server during
<port>
installation.
NOTE
If you configured your EPICenter server to use the default web server port 80, you do not need to include the
port number. However, the port used by EPICenter is 8080 by default, so in most cases you do need to include
the port.
The EPICenter browser-based client first presents a start-up page, as shown in
EPICenter Concepts and Solutions Guide
directory.
is the directory (path) where you installed the EPICenter components. If you
/opt/ExtremeNetworks/EPICenter6.0
runclient
with the name of the system where the EPICenter server is running.
Figure 3 on page 29.
found in the
runclient.exe
Figure
Starting EPICenter
.
2.
27