Extreme Networks EPICenter Guide Manual page 232

Configuring RADIUS for EPICenter Authentication
Figure 118: The Vendor-Specific Attribute Information window
9 Select the Enter Vendor Code radio button, and type 1916 as the vendor code.
Select the Yes. It conforms radio button.
Click Configure Attribute...
The Configure VSA pop-up appears.
Figure 119: Configuring the VSA
10 In the next window, provide the following:
Enter 210 for the Vendor-assigned attribute number.
Select String from the Attribute format drop-down menu.
Type an Attribute value that matches one of the EPICenter role names; either a predefines role
name, such as Administrator or Monitor, or a user-defined role name. If the Attribute value does not
match a role, the user will default to the Monitor role only.
EPICenter roles can be found in the Admin applet under the Roles tab.
Click OK to continue.
232
EPICenter Concepts and Solutions Guide