Extreme Networks EPICenter Guide Manual page 144

Tuning and Debugging EPICenter
Figure 63: A MIB Query example
To perform a MIB query, you enter the required data into the appropriate fields:
Enter into the first field the IP addresses of the devices from which you want to get data.
●
Enter any scalar MIB OIDs you want to retrieve into the second field.
●
Enter any Table-based MIB OIDs into the third field.
●
Entries must be one item per line.
Click Submit to execute the query. The results are returned in XML format in the reports window.
144
EPICenter Concepts and Solutions Guide