Video View (For 2.0M Pixel Camera Module - EUROCOM Notebook User Manual

Video View
(for 2.0M pixel camera module)
Video View is a video viewer useful for general purpose video viewing and testing,
and can capture video files to .avi format.
1. Run the Video View program from the Start > Programs/All Programs > USB2.0 PC
Camera menu (it is recommended that you set the capture file before the capture pro-
cess - see Set Capture File below).
2. Go to the Capture menu heading (if you wish to capture audio check
Audio Setup" on page D -
3. Click OK (the file location will be displayed in the pop-up box) to start capturing the
video, and press Esc to stop the capture.
Set Capture File
Prior to capturing video files you may Set Capture File... To avoid overwriting files
you can go to the Set Capture File.. option in the File menu, and set the file name
and location before capture. Set the name and location then click Open (you can
choose Cancel to ignore the file size if prompted).
45) and select Start Capture.
Windows XP Information
Pre-Allocating File
You may pre-allocate
the file size for the cap-
ture file in the Video
"PC Camera
View program.
Pre-allocating space on
the hard disk can im-
prove the capture quali-
ty (particularly of large
capture files), by reduc-
ing the amount of work
the hard disk has to do
in finding space for the
video data as it is being
captured.
PC Camera Module D - 49
Space
D