Bandluxe Hsdpa - Connection Manager - EUROCOM Notebook User Manual

BandLuxe HSDPA - Connection Manager

The connection information is stored on the USIM card supplied by the service pro-
vider (where this is not the case you may need to create a profile - see
Profile" on page 7 - 70).
1. Power on the 3.75G/HSPA module using the Fn +
2. Access the Connection Manager from the Start menu (Connection Manager
), or (Start > Programs/All Programs > BandLuxe > BandLuxe
HSDPA Utility R11 > Connection Manager).
3. Click CONNECT
key combination.
.
"Creating a
Figure 7 - 44
BandLuxe
Connection
Manager
(Not connected)
3.75G/HSPA Module 7 - 67
Modules
7