Clone Mode - EUROCOM Notebook User Manual

Clone Mode

Clone Mode simply shows an exact copy of the Primary display desktop on
the other display(s). This mode will drive multiple displays with the same con-
tent. Use this feature to display the screen through a projector for a presenta-
tion. Each display device can be configured independently as this allows you
to set the options for overhead projectors etc., which require specific resolu-
tions and refresh rates. Click on the bar
up the configuration options.
1
of the device in question to bring
1
ATI Video Driver Controls
Display Data
Channel
Information
Click the "Use DDC In-
formation" button to
disable/enable DDC.
DDC is a data channel
used by newer moni-
tors to provide informa-
tion (e.g. maximum
resolution and refresh
rates) to the video
adapter.
Different monitors sup-
port different resolu-
tions and refresh rates
(experiment for the
best setting).
Figure B - 4
Monitor Properties
Display Modes B - 7
B