Viewing Hardware Information - Dell Broadcom NetXtreme Family of Adapters User Manual

The port number of the adapter. For a single-port adapter, the function number is 0. For a two-port adapter, the function number for the first port is 0,
and the function number for the second port is 1.
Interrupt Request
The interrupt line number that is associated with the adapter. Valid numbers range from 2 to 25.
Memory Address
The memory mapped address that is assigned to the adapter. This value can never be 0.
MSI Version
This is the Message Signaled Interrupts (MSI) version being used. The option MSI corresponds to the PCI 2.2 specification that supports 32 messages and
a single MSI address value. The option MSI-X corresponds to the PCI 3.0 specification that supports 2,048 messages and an independent message address
for each message.

Viewing Hardware Information

The Hardware section of the Information tab displays information about the hardware settings for the selected network adapter.
To view Hardware for any installed network adapter, click the name of the adapter listed in the Device Management pane, then click the Information tab.
If the Information tab is not visible, then from the View menu, select Navigate, then Device Management, and then Information.
If the Hardware section within the Information tab is not visible, then from the Context View tab on the right side of the window, select
Information and then select Hardware.
NOTE: Some information may not be available for all Broadcom network adapters.
ASIC Version
The chip version of the Broadcom adapter (this information is not available for adapters made by others).
Firmware Version
The firmware version of the Broadcom adapter (this information is not available for adapters made by others). This information is only available for
Broadcom NetXtreme adapters.