Viewing Basp Statistics; Configuring With The Command Line Interface Utility; Supported Operating Systems - Dell Broadcom NetXtreme Family of Adapters User Manual

The configuration file is a text file that can be viewed by any text editor. The file contains information about both the adapter and the team
configuration.
To restore a configuration
1. From the File menu, select Team Restore.
2. Click the name of the file to be restored, and then click Open.
NOTE: If necessary, go to the folder where the file is located.
3. Click Apply.
4. Click Yes when the message is displayed indicating that the network connection will be temporarily interrupted.
5. If a configuration is already loaded, a message is displayed that asks if you want to save your current configuration. Click Yes to save the current
configuration. Otherwise, the configuration data that is currently loaded is lost.

Viewing BASP Statistics

The Statistics section shows performance information about the network adapters that are on a team.
To view BASP Statistics information for any team member adapter or the team as a whole, click the name of the adapter or team listed in the Team
Management pane, then click the Statistics tab.
If the Statistics tab is not visible, then from the View menu, select Navigate, then Team Management, and then Statistics.
If the General section is not visible, then from the Context View tab on the right side of the window, select Statistics and then select General.
Click Refresh to get the most recent values for each statistic. Click Reset to change all values to zero.

Configuring With the Command Line Interface Utility

An alternate method to BACS 3 for configuring Broadcom network adapters is with BACSCLI, which is a Broadcom utility that allows you to view
information and configure network adapters using a console in either a non-interactive command line interface (CLI) mode or an interactive mode. As with
BACS 3, BACSCLI provides information about each network adapter, and enables you to perform detailed tests, run diagnostics, view statistics, and modify
property values. BACSCLI also allows you the ability to team network adapters together for load balancing and failover.
For a complete list of available commands and examples, see the BACSCLI ReadMe text file on the Dell-provided CD.

Supported Operating Systems